Turn your farm into a Smart farm

Grow Smart!

EnSense

Climate control automation

Temperature | Humidity | VPD

Reduces electricity consumption

Read More

Farmato

Controls electric panel

Remote view capabilities

Automation Mode - Time based (Separate mode for day/night)

Read More

IoT Hub

Turn any farm into a Smart farm

Remotely access and control your farm

Automation Mode - Time based | Sensor based | Smart

Read More

Autonute

Smart dosing and fertigation solution

Controls and maintains - TDS | EC | pH

Patented sensors, 1 touch calibration

Read More

ElectroBox

Electrical equipment control panel

Controls power supply to the farm

Overload protection with alarm

Read More

Which solution is best for me?

If you chooseYou should be able to
Ensense+
  • View current values of temp, humidity, and VPD
  • View historical values of temp, humidity, and VPD
  • Access the values remotely through IoT dashboard
  • View graphical reports of climatic patterns in your growing environment  
  Farmato
  • Set electrical equipments in the farm to switch on and off at specific point in time (ex: on at 06:30, off at 07:15)
  • Set electrical equipments in the farm to switch on and off for specific intervals of time (ex: on for 5 minutes, off for 25 minutes)
  • Set separate schedules for day and night
  • Monitor power consumption in your farm
  • Access the values remotely through IoT dashboard
  • Access the values on-site through in-built display
 Ensense with IoT Hub
  • Get all features of Ensense+
  • Get all features of Farmato
  • Access the values of Ensense+ on-site through in-built display
  • Automate the farm equipment based on sensor values coming from Ensense
  • Run smart automation using a combination of time based and sensor based values
  • Run complex automation using a combination of time and/or inputs received from multiple different sensors to automate individual equipments
Autonute
  •  Automate the control of EC/TDS levels in the nutrient solution
  • Automate the control of pH level in the nutrient solution
  • Use any 2 part or 3 part nutrient recipe
  • Automate control of EC/TDS, pH Down, and pH Up at same time
  • Calibrate EC/TDS, pH sensors using 1 touch operation through on-site display
  • View current values of EC/TDS and pH
  • View historical values of EC/TDS and pH
  • Access the values remotely through IoT dashboard
  • Access the values on-site through in-built display
  • View graphical reports of nutrient parameters in your growing environment 
ElectroBox
  • Group similar equipment together to run them using single switch (ex: all fans on switch 1, irrigation pumps on switch 2, etc) 
  • Run 10 switches on automation
  • Run 2 switches on manual
  • Provide overload protection against electricity fluctuations
  • Monitor voltage, current, and electricity consumption on-site
  • Monitor electricity consumption remotely (will need either Farmato or IoT Hub)